REFERENCES
1. Kojima, A.; Teshima, K.; Shirai, Y.; Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 2009, 131, 6050-1.
2. National Laboratory of the Rockies. Best research-cell efficiency chart. Available online: https://www.nlr.gov/pv/cell-efficiency. (accessed 2026-07-01).
3. Eperon, G. E.; Stranks, S. D.; Menelaou, C.; Johnston, M. B.; Herz, L. M.; Snaith, H. J. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells. Energy. Environ. Sci. 2014, 7, 982.
4. Miyata, A.; Mitioglu, A.; Plochocka, P.; et al. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites. Nat. Phys. 2015, 11, 582-7.
5. Stranks, S. D.; Eperon, G. E.; Grancini, G.; et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 2013, 342, 341-4.
6. Chen, Z.; Dong, Q.; Liu, Y.; et al. Thin single crystal perovskite solar cells to harvest below-bandgap light absorption. Nat. Commun. 2017, 8, 1890.
7. Zhang, Z.; Zhu, R.; Li, G.; et al. Photoswitchable isomers to improve grain boundary resilience and perovskite solar cells stability under light cycling. Nat. Energy. 2026, 11, 623-32.
8. Yang, Y.; Cheng, S.; Yang, X.; et al. Hafnium oxide interface stabilization for efficient, photothermally stable perovskite solar cells. Science 2026, 391, 926-30.
9. Xiong, Z.; Zhang, Q.; Cai, K.; et al. Homogenized chlorine distribution for >27% power conversion efficiency in perovskite solar cells. Science 2025, 390, 638-42.
10. Peng, Z.; Vincze, A.; Streller, F.; et al. Revealing degradation mechanisms in 3D/2D perovskite solar cells under photothermal accelerated ageing. Energy. Environ. Sci. 2024, 17, 8313-24.
11. Luo, J.; Liu, B.; Yin, H.; et al. Polymer-acid-metal quasi-ohmic contact for stable perovskite solar cells beyond a 20,000-hour extrapolated lifetime. Nat. Commun. 2024, 15, 2002.
12. Zhang, W.; Guo, X.; Cui, Z.; et al. Strategies for improving efficiency and stability of inverted perovskite solar cells. Adv. Mater. 2024, 36, e2311025.
13. Smecca, E.; Numata, Y.; Deretzis, I.; et al. Stability of solution-processed MAPbI3 and FAPbI3 layers. Phys. Chem. Chem. Phys. 2016, 18, 13413-22.
14. Ruellou, J.; Courty, M.; Sauvage, F. Thermal and photo-degradation study of α-FAPbI3-based perovskite using in situ X-ray diffraction. Adv. Funct. Mater. 2023, 33, 2300811.
15. Di Girolamo, D.; Phung, N.; Kosasih, F. U.; et al. Ion migration-induced amorphization and phase segregation as a degradation mechanism in planar perovskite solar cells. Adv. Energy. Mater. 2020, 10, 2000310.
16. Kim, T.; Park, S.; Iyer, V.; et al. Mapping the pathways of photo-induced ion migration in organic-inorganic hybrid halide perovskites. Nat. Commun. 2023, 14, 1846.
17. Zhao, X.; Liu, T.; Burlingame, Q. C.; et al. Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells. Science 2022, 377, 307-10.
18. Wu, L.; Li, G.; Prashanthan, K.; et al. Stabilization of inorganic perovskite solar cells with a 2D dion-jacobson passivating layer. Adv. Mater. 2023, 35, 2304150.
19. Wang, P.; Zhang, X.; Zhou, Y.; et al. Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells. Nat. Commun. 2018, 9, 2225.
20. Duan, C.; Zhang, K.; Peng, Z.; et al. Durable all-inorganic perovskite tandem photovoltaics. Nature 2024, 637, 1111-7.
21. He, R.; Ren, S.; Chen, C.; et al. Wide-bandgap organic-inorganic hybrid and all-inorganic perovskite solar cells and their application in all-perovskite tandem solar cells. Energy. Environ. Sci. 2021, 14, 5723-59.
22. Sutton, R. J.; Filip, M. R.; Haghighirad, A. A.; et al. Cubic or orthorhombic? Revealing the crystal structure of metastable black-phase CsPbI3 by theory and experiment. ACS. Energy. Lett. 2018, 3, 1787-94.
23. Tan, S.; Yu, B.; Cui, Y.; et al. Temperature-reliable low-dimensional perovskites passivated black-phase CsPbI3 toward stable and efficient photovoltaics. Angew. Chem. Int. Ed. 2022, 61, e202201300.
24. Kweon, K. E.; Varley, J.; Ogitsu, T.; et al. Influence of external conditions on the black-to-yellow phase transition of CsPbI3 based on first-principles calculations: pressure and moisture. Chem. Mater. 2023, 35, 2321-9.
25. Ding, Y.; Guo, Q.; Geng, Y.; et al. A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %. Nano. Today. 2022, 46, 101586.
26. Lim, E. L.; Yang, J.; Wei, Z. Inorganic CsPbI2Br halide perovskites: from fundamentals to solar cell optimizations. Energy. Environ. Sci. 2023, 16, 862-88.
27. Park, J. H.; Yoon, Y. S.; Kim, J. Y. Fabrication processes for all-inorganic 3 perovskite solar cells. EcoMat 2023, 5, e12407.
28. Yao, Z.; Xu, Z.; Zhao, W.; et al. Enhanced efficiency of inorganic CsPbI3-xBrx perovskite solar cell via self-regulation of antisite defects. Adv. Energy. Mater. 2021, 11, 2100403.
29. Yue, S.; Long, Q.; Li, T.; et al. Recent progress on mitigating open-circuit voltage loss in inorganic CsPbX3 perovskite solar cells. ChemSusChem 2025, 18, e202500428.
30. Ke, W.; Spanopoulos, I.; Stoumpos, C. C.; Kanatzidis, M. G. Myths and reality of HPbI3 in halide perovskite solar cells. Nat. Commun. 2018, 9, 4785.
31. Wang, Y.; Dar, M. I.; Ono, L. K.; et al. Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%. Science 2019, 365, 591-5.
32. Swarnkar, A.; Mir, W. J.; Nag, A. Can B-site doping or alloying improve thermal- and phase-stability of all-inorganic CsPbX3 (X = Cl, Br, I) perovskites? ACS. Energy. Lett. 2018, 3, 286-9.
33. Li, B.; Zhang, Y.; Fu, L.; et al. Surface passivation engineering strategy to fully-inorganic cubic CsPbI3 perovskites for high-performance solar cells. Nat. Commun. 2018, 9, 1076.
34. Xu, T.; Xiang, W.; Yang, J.; et al. Interface modification for efficient and stable inverted inorganic perovskite solar cells. Adv. Mater. 2023, 35, 2303346.
35. Kulbak, M.; Cahen, D.; Hodes, G. How important is the organic part of lead halide perovskite photovoltaic cells? Efficient CsPbBr3 cells. J. Phys. Chem. Lett. 2015, 6, 2452-6.
36. Sanehira, E. M.; Marshall, A. R.; Christians, J. A.; et al. Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci. Adv. 2017, 3, eaao4204.
37. Wang, Y.; Zhang, T.; Kan, M.; Zhao, Y. Bifunctional stabilization of all-inorganic α-CsPbI3 perovskite for 17% efficiency photovoltaics. J. Am. Chem. Soc. 2018, 140, 12345-8.
38. Gu, X.; Xiang, W.; Tian, Q.; Liu, S. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2021, 60, 23164-70.
39. Zhang, H.; Xiang, W.; Zuo, X.; et al. Fluorine-containing passivation layer via surface chelation for inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2022, 62, e202216634.
40. Zhang, H.; Tian, Q.; Xiang, W.; et al. Tailored cysteine-derived molecular structures toward efficient and stable inorganic perovskite solar cells. Adv. Mater. 2023, 35, e2301140.
41. Li, R.; Zhang, S.; Zhang, H.; et al. Customizing aniline-derived molecular structures to attain beyond 22 % efficient inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2024, e202410600.
42. Li, R.; Chen, Q.; Zhang, H.; et al. Simultaneous charge extraction enhancement and defect passivation via a planar conjugated molecular interface enable 22.49%-efficient inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2025, 64, e202510925.
43. Yang, M.; Wang, H.; Cai, W.; Zang, Z. Mixed-halide inorganic perovskite solar cells: opportunities and challenges. Adv. Opt. Mater. 2023, 11, 2301052.
44. Li, C.; Lu, X.; Ding, W.; et al. Formability of ABX3 (X= F, Cl, Br, I) halide perovskites. Acta. Crystallogr. B. 2008, 64, 702-7.
45. Jena, A. K.; Kulkarni, A.; Miyasaka, T. Halide perovskite photovoltaics: background, status, and future prospects. Chem. Rev. 2019, 119, 3036-103.
47. Sun, Q.; Yin, W. Thermodynamic stability trend of cubic perovskites. J. Am. Chem. Soc. 2017, 139, 14905-8.
48. Yang, R.; Yang, D.; Liu, S. F. High-performance all-inorganic cesium halide perovskite solar cells. Chem. Rev. 2026, 126, 1408-69.
49. Zhang, J.; Jin, Z.; Liang, L.; et al. Iodine-optimized interface for inorganic CsPbI2Br perovskite solar cell to attain high stabilized efficiency exceeding 14%. Adv. Sci. 2018, 5, 1801123.
50. Wu, X.; Wang, S.; Zhang, J.; et al. Bypassing the non-perovskite yellow phase: revealing and regulating the crystallization pathways for efficient all-inorganic perovskite solar cells. Nano. Energy. 2023, 117, 108907.
51. Zhang, X.; Zhang, D.; Wang, Z.; Zhao, Y.; Chen, H. All-inorganic tin-containing perovskite solar cells: an emerging eco-friendly photovoltaic technology. Adv. Mater. 2025, 37, 2505543.
52. Duan, C.; Hu, M.; Zhu, Q.; et al. Tuning the crystallization and photothermal aging chemistry of CsPb0.4Sn0.6I3 for inorganic perovskite tandem photovoltaics. Angew. Chem. Int. Ed. 2025, 64, e202507761.
53. Jbara, A. S.; Munir, J.; Ul Haq, B.; Saeed, M. A. Density functional theory study of mixed halide influence on structures and optoelectronic attributes of CsPb(I/Br)3. Appl. Opt. 2020, 59, 3751-9.
54. Sutton, R. J.; Eperon, G. E.; Miranda, L.; et al. Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells. Adv. Energy. Mater. 2016, 6, 1502458.
55. Ullah, S.; Khan, F.; Rasheed, J. F. Prospects for commercialization of CsPbIBr2-based all-inorganic perovskite solar cells: fabrication, stability, and engineering strategies. Adv. Funct. Mater. 2025, 35, 2503508.
56. Ghaithan, H. M.; Alahmed, Z. A.; Qaid, S. M.; Aldwayyan, A. S. First principle-based calculations of the optoelectronic features of 2 x 2 x 2 CsPb(I1-xBrx)3 perovskite. Superlattices. Microstruct. 2020, 140, 106474.
57. Ravi, V. K.; Markad, G. B.; Nag, A. Band edge energies and excitonic transition probabilities of colloidal CsPbX3 (X = Cl, Br, I) perovskite nanocrystals. ACS. Energy. Lett. 2016, 1, 665-71.
58. Chen, G.; Li, P.; Xue, T.; et al. Design of low bandgap CsPb1-xSnxI2Br perovskite solar cells with excellent phase stability. Small 2021, 17, 2101380.
59. Hu, S.; Thiesbrummel, J.; Pascual, J.; Stolterfoht, M.; Wakamiya, A.; Snaith, H. J. Narrow bandgap metal halide perovskites for all-perovskite tandem photovoltaics. Chem. Rev. 2024, 124, 4079-123.
60. Goyal, A.; Mckechnie, S.; Pashov, D.; Tumas, W.; Van Schilfgaarde, M.; Stevanović, V. Origin of pronounced nonlinear band gap behavior in lead-tin hybrid perovskite alloys. Chem. Mater. 2018, 30, 3920-8.
61. Bandara, R. M. I.; Silva, S. M.; Underwood, C. C. L.; Jayawardena, K. D. G. I.; Sporea, R. A.; Silva, S. R. P. Progress of Pb-Sn mixed perovskites for photovoltaics: a review. Energy. Environ. Mater. 2021, 5, 370-400.
62. Wen, Q.; Duan, C.; Zou, F.; et al. All-inorganic CsPb1-xSnxI2Br perovskites mediated by dicyandiamide additive for efficient 4-terminal tandem solar cell. Chem. Eng. J. 2023, 452, 139697.
63. Pai, N.; Angmo, D. Powering the future: opportunities and obstacles in lead-halide inorganic perovskite solar cells. Advanced. Science. 2025, 12, 2412666.
64. Liu, H.; Han, H.; Xu, J.; et al. A 0D additive for flexible all-inorganic perovskite solar cells to go beyond 60 000 flexible cycles. Adv. Mater. 2023, 35, e2300302.
65. Liu, H.; Xu, J.; Han, H.; et al. Debridement strategy by pre-bending passivation for flexible all-inorganic perovskite solar cells beyond 70 000 bending cycles. Adv. Funct. Mater. 2024, 34, 2400975.
66. Zhu, M.; Qin, L.; Xia, Y.; et al. Indium-doped CsPbI2.5Br0.5 with a tunable band structure and improved crystallinity for thermo-stable all-inorganic perovskite solar cells. ACS. Appl. Energy. Mater. 2023, 6, 8237-44.
67. Li, X.; Wang, K.; Lgbari, F.; et al. Indium doped CsPbI3 films for inorganic perovskite solar cells with efficiency exceeding 17%. Nano. Res. 2020, 13, 2203-8.
68. Singh, R. K.; Kumar, R.; Jain, N.; Dash, S. R.; Singh, J.; Srivastava, A. Investigation of optical and dielectric properties of CsPbI3 inorganic lead iodide perovskite thin film. J. Taiwan. Inst. Chem. Eng. 2019, 96, 538-42.
69. Maleka, P. M.; Dima, R. S.; Ntwaeaborwa, O. M.; et al. Density functional theory study of Br doped CsPbI3 perovskite for photovoltaic and optoelectronic applications. Phys. Scripta. 2023, 98, 045505.
70. Pintor Monroy, M. I.; Goldberg, I.; Elkhouly, K.; et al. All-evaporated, all-inorganic CsPbI3 perovskite-based devices for broad-band photodetector and solar cell applications. ACS. Appl. Electron. Mater. 2021, 3, 3023-33.
71. Duan, C.; Li, J.; Liu, Z.; Wen, Q.; Tang, H.; Yan, K. Highly electroluminescent and stable inorganic CsPbI2Br perovskite solar cell enabled by balanced charge transfer. Chem. Eng. J. 2021, 417, 128053.
72. Zhou, S.; Zhou, C.; Zhu, J.; et al. Enhanced field emission properties of CsPbBr3 films by thermal annealing and surface functionalization with boron nitride. Appl. Surf. Sci. 2022, 578, 152116.
73. Zhou, C.; Huang, Y.; Zhang, Y.; et al. CsPbBr3 microarrays with tunable periodicity, optoelectronic and field emission properties using self-assembled polystyrene template and co-evaporation method. Phys. Chem. Chem. Phys. 2022, 24, 13210-6.
74. Lei, J.; Gao, F.; Wang, H.; et al. Efficient planar CsPbBr3 perovskite solar cells by dual-source vacuum evaporation. Sol. Energy. Mater. Sol. Cells. 2018, 187, 1-8.
75. Lee, J. H.; Kim, B. S.; Park, J.; Lee, J. W.; Kim, K. Opportunities and challenges for perovskite solar cells based on vacuum thermal evaporation. Adv. Mater. Technol. 2022, 8, 2200928.
76. Lau, C. F. J.; Deng, X.; Ma, Q.; et al. CsPbIBr2 perovskite solar cell by spray-assisted deposition. ACS. Energy. Lett. 2016, 1, 573-7.
77. Tai, Q.; Tang, K.; Yan, F. Recent progress of inorganic perovskite solar cells. Energy. Environ. Sci. 2019, 12, 2375-405.
78. Mali, S. S.; Patil, J. V.; Hong, C. K. Hot-air-assisted fully air-processed barium incorporated CsPbI2Br perovskite thin films for highly efficient and stable all-inorganic perovskite solar cells. Nano. Lett. 2019, 19, 6213-20.
79. Mali, S. S.; Patil, J. V.; Shinde, P. S.; De Miguel, G.; Hong, C. K. Fully air-processed dynamic hot-air-assisted M:CsPbI2Br (M: Eu2+, In3+) for stable inorganic perovskite solar cells. Matter 2021, 4, 635-53.
80. Abate, S. Y.; Qi, Y.; Zhang, Q.; et al. Eco-friendly solvent engineered CsPbI2.77Br0.23 Ink for large-area and scalable high performance perovskite solar cells. Adv. Mater. 2023, 36, 2310279.
81. Wang, J.; Che, Y.; Duan, Y.; et al. 21.15%-efficiency and stable γ -CsPbI3 perovskite solar cells enabled by an acyloin ligand. Adv. Mater. 2023, 35, 2210223.
82. Song, J.; Xie, H.; Lim, E. L.; Hagfeldt, A.; Bi, D. Progress and perspective on inorganic CsPbI2Br perovskite solar cells. Adv. Energy. Mater. 2022, 12, 2201854.
83. Feng, J.; Han, X.; Huang, H.; et al. Curing the fundamental issue of impurity phases in two-step solution-processed CsPbBr3 perovskite films. Sci. Bull. 2020, 65, 726-37.
84. Zeng, Z.; Zhang, J.; Gan, X.; et al. In situ grain boundary functionalization for stable and efficient inorganic CsPbI2Br perovskite solar cells. Adv. Energy. Mater. 2018, 8, 1801050.
85. Han, Y.; Xie, H.; Lim, E. L.; Bi, D. Review of two-step method for lead halide perovskite solar cells. Solar. RRL. 2022, 6, 2101007.
86. Liu, X.; Tan, X.; Liu, Z.; et al. Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering. Nano. Energy. 2019, 56, 184-95.
87. Zhu, W.; Ma, J.; Chai, W.; et al. Intermediate phase-assisted sequential deposition toward 15.24%-efficiency carbon-electrode cspbi2br perovskite solar cells. Solar. RRL. 2022, 6, 2200020.
88. Liu, Z.; Jung, H.; Sotome, M.; et al. Substrate temperature dependence of vapor-phase deposition of all-inorganic lead-free CsSnBr3 perovskite thin films. Jpn. J. Appl. Phys. 2024, 63, 02SP23.
89. Bai, T.; Wang, S.; Bai, L.; Zhang, K.; Chu, C.; Yi, L. Vacuum evaporation of high-quality CsPbBr3 thin films for efficient light-emitting diodes. Nanoscale. Res. Lett. 2022, 17, 69.
90. Huang, J.; Yao, H.; You, F.; et al. Effects of post-annealing on the property of CsPbBr3 films and the performance of relevant light-emitting diodes. J. Lumin. 2024, 275, 120771.
91. Zhang, Y.; Huang, Y.; Zhou, C.; Xu, Y.; Zhong, J.; Mao, H. Crystalline structures and optoelectronic properties of orthorhombic CsPbBr3 polycrystalline films grown by the Co-evaporation method. Vacuum 2022, 202, 111219.
92. Li, J.; Gao, R.; Gao, F.; et al. Fabrication of efficient CsPbBr3 perovskite solar cells by single-source thermal evaporation. J. Alloys. Compd. 2020, 818, 152903.
93. Ullah, S.; Wang, J.; Yang, P.; et al. All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics. Mater. Adv. 2021, 2, 646-83.
94. He, Z.; Peng, C.; Guo, R.; et al. High-efficiency and emission-tunable inorganic blue perovskite light-emitting diodes based on vacuum deposition. Small 2023, 20, 2305379.
95. Liu, X.; Tan, X.; Liu, Z.; et al. Sequentially vacuum evaporated high-quality CsPbBr3 films for efficient carbon-based planar heterojunction perovskite solar cells. J. Power. Sources. 2019, 443, 227269.
96. Abbasli, M.; Hieulle, J.; Schrage, J.; et al. Tin halide perovskite epitaxial films on gold surfaces: atomic structure and stability. Adv. Funct. Mater. 2024, 34, 2403680.
97. Ritzer, D. B.; Abzieher, T.; Basibüyük, A.; et al. Upscaling of perovskite solar modules: the synergy of fully evaporated layer fabrication and all-laser-scribed interconnections. Prog. Photovolt. 2021, 30, 360-73.
98. Liu, T.; Zhao, X.; Wang, P.; et al. Highly transparent, scalable, and stable perovskite solar cells with minimal aesthetic compromise. Adv. Energy. Mater. 2022, 13, 2200402.
99. Piot, M.; Alonso, J. E. S.; Zanoni, K. P. S.; et al. Fast coevaporation of 1 μm thick perovskite solar cells. ACS. Energy. Lett. 2023, 8, 4711-3.
100. Kosasih, F. U.; Erdenebileg, E.; Mathews, N.; Mhaisalkar, S. G.; Bruno, A. Thermal evaporation and hybrid deposition of perovskite solar cells and mini-modules. Joule 2022, 6, 2692-734.
101. Haruta, Y.; Ikenoue, T.; Miyake, M.; Hirato, T. One-step coating of full-coverage CsPbBr3 thin films via mist deposition for all-inorganic perovskite solar cells. ACS. Appl. Energy. Mater. 2020, 3, 11523-8.
102. Liu, X.; Li, J.; Liu, Z.; et al. Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc. Electrochim. Acta. 2020, 330, 135266.
103. Li, X.; Tan, Y.; Lai, H.; et al. All-inorganic CsPbBr3 perovskite solar cells with 10.45% efficiency by evaporation-assisted deposition and setting intermediate energy levels. ACS. Appl. Mater. Interfaces. 2019, 11, 29746-52.
104. Duan, J.; Dou, D.; Zhao, Y.; et al. Spray-assisted deposition of CsPbBr3 films in ambient air for large-area inorganic perovskite solar cells. Mater. Today. Energy. 2018, 10, 146-52.
105. Näsström, H.; Becker, P.; Márquez, J. A.; et al. Dependence of phase transitions on halide ratio in inorganic CsPb(BrxIx)3 perovskite thin films obtained from high-throughput experimentation. J. Mater. Chem. A. 2020, 8, 22626-31.
106. Ye, Q.; Zhao, Y.; Mu, S.; et al. Cesium lead inorganic solar cell with efficiency beyond 18% via reduced charge recombination. Adv. Mater. 2019, 31, 1905143.
107. Cheng, J.; Mu, Y.; Wu, L.; et al. Acetate-assistant efficient cation-exchange of halide perovskite nanocrystals to boost the photocatalytic CO2 reduction. Nano. Res. 2021, 15, 1845-52.
108. Zhao, H.; Han, Y.; Xu, Z.; et al. A novel anion doping for stable CsPbI2Br perovskite solar cells with an efficiency of 15.56% and an open circuit voltage of 1.30 V. Adv. Energy. Mater. 2019, 9, 1902279.
109. Lou, Y.; Niu, Y.; Yang, D.; et al. Rod-shaped thiocyanate-induced abnormal band gap broadening in SCN- doped CsPbBr3 perovskite nanocrystals. Nano. Res. 2018, 11, 2715-23.
110. Zhang, Z.; Chen, W.; Jiang, X.; et al. Suppression of phase segregation in wide-bandgap perovskites with thiocyanate ions for perovskite/organic tandems with 25.06% efficiency. Nat. Energy. 2024, 9, 592-601.
111. Wu, H.; Yang, Y.; Zhou, D.; et al. Rb+ cations enable the change of luminescence properties in perovskite (RbxCs1-xPbBr3) quantum dots. Nanoscale 2018, 10, 3429-37.
112. Nam, J. K.; Chai, S. U.; Cha, W.; et al. Potassium incorporation for enhanced performance and stability of fully inorganic cesium lead halide perovskite solar cells. Nano. Lett. 2017, 17, 2028-33.
113. Lu, M.; Zhang, X.; Bai, X.; et al. Spontaneous silver doping and surface passivation of CsPbI3 perovskite active layer enable light-emitting devices with an external quantum efficiency of 11.2%. ACS. Energy. Lett. 2018, 3, 1571-7.
114. Shi, J.; Li, F.; Yuan, J.; et al. Efficient and stable CsPbI3 perovskite quantum dots enabled by in situ ytterbium doping for photovoltaic applications. J. Mater. Chem. A. 2019, 7, 20936-44.
115. Karunakaran, S. K.; Arumugam, G. M.; Yang, W.; et al. Europium (II)-doped all-inorganic CsPbBr3 perovskite solar cells with carbon electrodes. Solar. RRL. 2020, 4, 2000390.
116. Zhao, Y.; Wang, Y.; Duan, J.; Yang, X.; Tang, Q. Divalent hard Lewis acid doped CsPbBr3 films for 9.63%-efficiency and ultra-stable all-inorganic perovskite solar cells. J. Mater. Chem. A. 2019, 7, 6877-82.
117. Lau, C. F. J.; Deng, X.; Zheng, J.; et al. Enhanced performance via partial lead replacement with calcium for a CsPbI3 perovskite solar cell exceeding 13% power conversion efficiency. J. Mater. Chem. A. 2018, 6, 5580-6.
118. Chen, J.; Ma, J.; Guo, S.; et al. High-efficiency violet-emitting all-inorganic perovskite nanocrystals enabled by alkaline-earth metal passivation. Chem. Mater. 2019, 31, 3974-83.
119. Lau, C. F. J.; Zhang, M.; Deng, X.; et al. Strontium-doped low-temperature-processed CsPbI2Br perovskite solar cells. ACS. Energy. Lett. 2017, 2, 2319-25.
120. Liu, F.; Ding, C.; Zhang, Y.; et al. Colloidal synthesis of air-stable alloyed CsSnxPbxI3 perovskite nanocrystals for use in solar cells. J. Am. Chem. Soc. 2017, 139, 16708-19.
121. Jin, H.; Zeng, Y.; Steele, J. A.; Roeffaers, M. B. J.; Hofkens, J.; Debroye, E. Phase stabilization of cesium lead iodide perovskites for use in efficient optoelectronic devices. NPG. Asia. Mater. 2024, 16, 24.
122. Liang, J.; Zhao, P.; Wang, C.; et al. CsPb0.9Sn0.1IBr2 based all-inorganic perovskite solar cells with exceptional efficiency and stability. J. Am. Chem. Soc. 2017, 139, 14009-12.
123. Tang, M.; He, B.; Dou, D.; et al. Toward efficient and air-stable carbon-based all-inorganic perovskite solar cells through substituting CsPbBr3 films with transition metal ions. Chem. Eng. J. 2019, 375, 121930.
124. Zhang, L.; Kang, C.; Zhang, G.; et al. All-inorganic CsPbI3 quantum dot solar cells with efficiency over 16% by defect control. Adv. Funct. Mater. 2020, 31, 2005930.
125. Liang, J.; Liu, Z.; Qiu, L.; et al. Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes. Adv. Energy. Mater. 2018, 8, 1800504.
126. Öz, S.; Burschka, J.; Jung, E.; et al. Protic ionic liquid assisted solution processing of lead halide perovskites with water, alcohols and acetonitrile. Nano. Energy. 2018, 51, 632-8.
127. Hamill, J. C.; Schwartz, J.; Loo, Y. Influence of solvent coordination on hybrid organic-inorganic perovskite formation. ACS. Energy. Lett. 2017, 3, 92-7.
128. Zhang, X.; Yu, Z.; Zhang, D.; et al. Recent progress of carbon-based inorganic perovskite solar cells: from efficiency to stability. Adv. Energy. Mater. 2023, 13, 2201320.
129. Jiang, Y.; Yuan, J.; Ni, Y.; et al. Reduced-dimensional α-CsPbX3 perovskites for efficient and stable photovoltaics. Joule 2018, 2, 1356-68.
130. Wang, H.; Sun, J.; Gu, Y.; et al. Solvent-engineering-processed CsPbIBr2 inorganic perovskite solar cells with efficiency of ~11%. Sol. Energy. Mater. Sol. Cells. 2022, 238, 111640.
131. Oh, J.; Kim, S. H.; Choi, S.; et al. Enhancing performance and stability of perovskite solar cells via CsPbBr3 nanocrystal-assisted antisolvent engineering. Curr. Appl. Phys. 2025, 71, 37-45.
132. Taylor, A. D.; Sun, Q.; Goetz, K. P.; et al. A general approach to high-efficiency perovskite solar cells by any antisolvent. Nat. Commun. 2021, 12, 1878.
133. Jeon, N. J.; Noh, J. H.; Kim, Y. C.; Yang, W. S.; Ryu, S.; Seok, S. I. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat. Mater. 2014, 13, 897-903.
134. Jiang, Y.; Deng, D.; Dong, J. Preparation of highly efficient and stable all-inorganic perovskite solar cells in atmosphere environment. Energies. 2025, 18, 2162.
135. Dong, C.; Han, X.; Li, W.; Qiu, Q.; Wang, J. Anti-solvent assisted multi-step deposition for efficient and stable carbon-based CsPbI2Br all-inorganic perovskite solar cell. Nano. Energy. 2019, 59, 553-9.
136. Chen, C.; Bala, H.; Yao, S.; et al. Enhanced efficiency and stability of perovskite solar cells based on carbon-counter-electrode via anti-solvent treatment. J. Alloys. Compd. 2022, 920, 165874.
137. Zhang, N.; Zhang, Z.; Liu, T.; et al. Efficient and stable MAPbI3 perovskite solar cells via green anti-solvent diethyl carbonate. Org. Electron. 2023, 113, 106709.
138. Sanchez, S.; Christoph, N.; Grobety, B.; et al. Efficient and stable inorganic perovskite solar cells manufactured by pulsed flash infrared annealing. Adv. Energy. Mater. 2018, 8, 1802060.
139. Zhang, B.; Bi, W.; Wu, Y.; et al. High-performance CsPbIBr2 perovskite solar cells: effectively promoted crystal growth by antisolvent and organic ion strategies. ACS. Appl. Mater. Interfaces. 2019, 11, 33868-78.
140. Hyun Park, S.; Su Jin, I.; Woong Jung, J. Green solvent engineering for environment-friendly fabrication of high-performance perovskite solar cells. Chem. Eng. J. 2021, 425, 131475.
141. Moot, T.; Marshall, A. R.; Wheeler, L. M.; et al. CsI-antisolvent adduct formation in all-inorganic metal halide perovskites. Adv. Energy. Mater. 2020, 10, 1903365.
142. Duan, C.; Wen, Q.; Fan, Y.; Li, J.; Liu, Z.; Yan, K. Improving the stability and scalability of all-inorganic inverted CsPbI2Br perovskite solar cell. J. Energy. Chem. 2022, 68, 176-83.
143. Chen, W.; Chen, H.; Xu, G.; et al. Precise control of crystal growth for highly efficient CsPbI2Br perovskite solar cells. Joule 2019, 3, 191-204.
144. Xia, J.; Liang, C.; Gu, H.; et al. Surface passivation toward efficient and stable perovskite solar cells. Energy. Environ. Mater. 2022, 6, e12296.
145. Chung, Y.; Kim, K. S.; Jung, J. W. On the role of carboxylated polythiophene in defect passivation of CsPbI2 Br surface for efficient and stableall-inorganic perovskite solar cells. Intl. J. of. Energy. Research. 2021, 46, 6012-21.
146. Fu, S.; Wan, L.; Zhang, W.; Li, X.; Song, W.; Fang, J. Tailoring in situ healing and stabilizing post-treatment agent for high-performance inverted CsPbI3 perovskite solar cells with efficiency of 16.67%. ACS. Energy. Lett. 2020, 5, 3314-21.
147. Xiao, H.; Zuo, C.; Yan, K.; et al. Highly efficient and air-stable inorganic perovskite solar cells enabled by polylactic acid modification. Adv. Energy. Mater. 2023, 13, 2300738.
148. Yoon, S. M.; Min, H.; Kim, J. B.; Kim, G.; Lee, K. S.; Seok, S. I. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule 2021, 5, 183-96.
149. Wang, Y.; Zhang, T.; Kan, M.; Li, Y.; Wang, T.; Zhao, Y. Efficient α-CsPbI3 photovoltaics with surface terminated organic cations. Joule 2018, 2, 2065-75.
150. Yan, F.; Yang, P.; Li, J.; et al. Healing soft interface for stable and high-efficiency all-inorganic CsPbIBr2 perovskite solar cells enabled by S-benzylisothiourea hydrochloride. Chem. Eng. J. 2022, 430, 132781.
151. Fu, S.; Zhang, W.; Li, X.; et al. Dual-protection strategy for high-efficiency and stable CsPbI2Br inorganic perovskite solar cells. ACS. Energy. Lett. 2020, 5, 676-84.
152. Wang, X.; Wang, Y.; Chen, Y.; Liu, X.; Zhao, Y. Efficient and stable CsPbI3 inorganic perovskite photovoltaics enabled by crystal secondary growth. Adv. Mater. 2021, 33, 2103688.
153. Bai, F.; Zhang, J.; Yuan, Y.; et al. A 0D/3D heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability. Adv. Mater. 2019, 31, 1904735.
154. Chen, Y.; Wang, X.; Wang, Y.; Liu, X.; Miao, Y.; Zhao, Y. Functional organic cation induced 3D-to-0D phase transformation and surface reconstruction of CsPbI3 inorganic perovskite. Sci. Bull. 2023, 68, 706-12.
155. Liu, X.; Wang, X.; Zhang, T.; et al. Organic tetrabutylammonium cation intercalation to heal inorganic CsPbI3 perovskite. Angew. Chem. Int. Ed. 2021, 60, 12351-5.
156. Kim, H.; Lee, S. U.; Lee, D. Y.; et al. Optimal interfacial engineering with different length of alkylammonium halide for efficient and stable perovskite solar cells. Adv. Energy. Mater. 2019, 9, 1902740.
157. Zhang, T.; Dar, M. I.; Li, G.; et al. Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI3 perovskite phase for high-efficiency solar cells. Sci. Adv. 2017, 3, e1700841.
158. Zhang, S.; Zhang, L.; Tian, Q.; et al. Spontaneous construction of multidimensional heterostructure enables enhanced hole extraction for inorganic perovskite solar cells to exceed 20% efficiency. Adv. Energy. Mater. 2021, 12, 2103007.
159. Li, J.; Shan, X.; Bade, S. G. R.; et al. Single-layer halide perovskite light-emitting diodes with sub-band gap turn-on voltage and high brightness. J. Phys. Chem. Lett. 2016, 7, 4059-66.
160. Chen, H.; Zhang, T.; Wang, F.; et al. Efficient stabilization and passivation for low-temperature-processed γ-CsPbI3 solar cells. ACS. Appl. Mater. Interfaces. 2021, 13, 18784-91.
161. Zhang, L.; Guo, T.; Liu, B.; et al. Intermediate-phase-modified crystallization for stable and efficient CsPbI3 perovskite solar cells. ACS. Appl. Mater. Interfaces. 2022, 14, 19614-22.
162. Du, Y.; Tian, Q.; Chang, X.; et al. Ionic liquid treatment for highest-efficiency ambient printed stable all-inorganic CsPbI3 perovskite solar cells. Adv. Mater. 2022, 34, 2106750.
163. Wang, Q.; Zheng, X.; Deng, Y.; Zhao, J.; Chen, Z.; Huang, J. Stabilizing the α-Phase of CsPbI3 perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule 2017, 1, 371-82.
164. Wu, T.; Wang, Y.; Dai, Z.; et al. Efficient and stable CsPbI3 solar cells via regulating lattice distortion with surface organic terminal groups. Adv. Mater. 2019, 31, 1900605.
165. Zhang, J.; Fang, Y.; Zhao, W.; Han, R.; Wen, J.; Liu, S. Molten-salt-assisted CsPbI3 perovskite crystallization for nearly 20%-efficiency solar cells. Adv. Mater. 2021, 33, e2103770.
166. Wang, Y.; Liu, X.; Zhang, T.; et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant? Angew. Chem. Int. Ed. 2019, 58, 16691-6.
167. Meng, H.; Shao, Z.; Wang, L.; et al. Chemical composition and phase evolution in DMAI-derived inorganic perovskite solar cells. ACS. Energy. Lett. 2019, 5, 263-70.
168. Sun, X.; Shao, Z.; Li, Z.; et al. Highly efficient CsPbI3/Cs1-xDMAxPbI3 bulk heterojunction perovskite solar cell. Joule 2022, 6, 850-60.
169. Cui, Y.; Shi, J.; Meng, F.; et al. A versatile molten-salt induction strategy to achieve efficient CsPbI3 perovskite solar cells with a high open-circuit voltage >1.2 V. Adv. Mater. 2022, 34, e2205028.
170. Yu, G. Jiang, K.-J.; Gu, W.-M.; et al. Vacuum-assisted thermal annealing of CsPbI3 for highly stable and efficient inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2022, 61, e202203778.
171. Eperon, G. E.; Paternò, G. M.; Sutton, R. J.; et al. Inorganic caesium lead iodide perovskite solar cells. J. Mater. Chem. A. 2015, 3, 19688-95.
172. Luo, P.; Xia, W.; Zhou, S.; et al. Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells. J. Phys. Chem. Lett. 2016, 7, 3603-8.
173. Wang, K.; Jin, Z.; Liang, L.; et al. All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%. Nat. Commun. 2018, 9, 4544.
174. Pei, Y.; Liu, Y.; Li, F.; Bai, S.; Jian, X.; Liu, M. Unveiling property of hydrolysis-derived DMAPbI3 for perovskite devices: composition engineering, defect mitigation, and stability optimization. iScience 2019, 15, 165-72.
175. Yang, F.; Ruan, Y.; Li, S.; et al. A flowing liquid phase induces the crystallization processes of cesium lead triiodide for 21.85%-efficiency solar cells and low-energy loss. Energy. Environ. Sci. 2025, 18, 1232-40.
176. Wang, G.Q.; Wang, D.S.; Bi, J.Y.; et al. Tailoring the crystallization of CsPbIBr2 perovskite via phenylthiourea for stable and efficient perovskite solar cells. Acta Phys. Sin. 2023, 72, 158801.
177. Zhu, J.; He, B.; Gong, Z.; et al. Grain enlargement and defect passivation with melamine additives for high efficiency and stable CsPbBr3 perovskite solar cells. ChemSusChem 2020, 13, 1834-43.
178. Wang, X.; Ran, X.; Liu, X.; et al. Tailoring component interaction for air-processed efficient and stable all-inorganic perovskite photovoltaic. Angew. Chem. Int. Ed. 2020, 59, 13354-61.
179. Zhao, H.; Fu, Y.; Li, Z.; et al. High-efficiency and thermal/moisture stable CsPbI2.84Br0.16 inorganic perovskite solar cells enabled by a multifunctional cesium trimethylacetate organic additive. J. Mater. Chem. A. 2021, 9, 4922-32.
180. Zhang, Z.; Ji, R.; Hofstetter, Y. J.; et al. Towards low-temperature processing of efficient γ-CsPbI3 perovskite solar cells. J. Mater. Chem. A. 2023, 11, 16115-26.
181. Ling, Y.; Tian, Y.; Wang, X.; et al. Enhanced optical and electrical properties of polymer-assisted all-inorganic perovskites for light-emitting diodes. Adv. Mater. 2016, 28, 8983-9.
182. Zhang, L.; Mei, L.; Wang, K.; et al. Advances in the application of perovskite materials. Nano-Micro. Lett. 2023, 15, 177.
183. Tan, J.; Tong, S.; Zhou, T.; Lin, J.; Liu, Y. Research and development of modification strategies based on all inorganic perovskite solar cells. Nano. Energy. 2025, 138, 110815.
184. Sosa Acosta, A.; Angel, F. A. Thermally evaporated CsPbBr3 for green perovskite light-emitting diodes: challenges and perspectives. ACS. Appl. Electron. Mater. 2025, 7, 1361-76.
185. Li, X.; Gao, X.; Zhang, X.; et al. Lead-free halide perovskites for light emission: recent advances and perspectives. Adv. Sci. 2021, 8, 2003334.
186. Luo, M.; Wei, C.; Wu, Y.; Lei, W.; Zhang, X.; Zeng, H. All-inorganic perovskite film photodetectors with tailored deposition techniques and component engineering. J. Mater. Chem. C. 2024, 12, 11675-711.
187. Xu, R.; Chin, X. Y.; White, L. R. W.; Mhaisalkar, S. G.; Bruno, A. Transforming near-infrared photodetectors with perovskites: materials, strategies, and future outlook. Energy. Fuels. 2025, 39, 10744-67.
188. Chen, R.; Wang, C.; Zhang, X.; et al. Recent advancements in all-inorganic and organic-inorganic hybrid metal halide materials for photocatalytic CO2 reduction reaction. Front. Energy. 2025, 19, 450-70.
189. De Giorgi, M. L.; Perulli, A.; Yantara, N.; Boix, P. P.; Anni, M. Amplified spontaneous emission properties of solution processed CsPbBr3 perovskite thin films. J. Phys. Chem. C. 2017, 121, 14772-8.
190. Zhang, L.; Yuan, F.; Dong, H.; et al. One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability. ACS. Appl. Mater. Interfaces. 2018, 10, 40661-71.
191. Li, G.; Cheng, S.; Chen, X.; et al. Erbium-induced boost in self-trapped exciton emission of double perovskites for highly sensitive multimodal and multiplexed optical thermography. Adv. Funct. Mater. 2024, 34, 2403073.
192. Chang, X.; Fang, J.; Fan, Y.; et al. Printable CsPbI3 perovskite solar cells with PCE of 19% via an additive strategy. Adv. Mater. 2020, 32, 2001243.
193. Xiao, H.; Zuo, C.; Liu, F.; Ding, L. Drop-coating produces efficient CsPbI2Br solar cells. J. Semicond. 2021, 42, 050502.
194. Zhang, L.; Chen, S.; Zeng, J.; et al. Inkjet-printing controlled phase evolution boosts the efficiency of hole transport material free and carbon-based CsPbBr3 perovskite solar cells exceeding 9%. Energy. Environ. Mater. 2023, 7, e12543.
195. Ma, Q.; Huang, S.; Chen, S.; et al. The effect of stoichiometry on the stability of inorganic cesium lead mixed-halide perovskites solar cells. J. Phys. Chem. C. 2017, 121, 19642-9.
196. Li, Y.; Xu, J.; Shen, H.; et al. Morphology, luminescence and the gravity sedimentation effect of flexible and highly stable CsPbBr3 nanocrystal patterns by the inkjet printing method. CrystEngComm 2024, 26, 5046-58.
197. Parida, B.; Singh, A.; Kalathil Soopy, A. K.; et al. Recent developments in upscalable printing techniques for perovskite solar cells. Adv. Sci. 2022, 9, 2200308.
198. Liu, C.; Yang, Y.; Zhang, C.; et al. Tailoring C60 for efficient inorganic CsPbI2Br perovskite solar cells and modules. Adv. Mater. 2020, 32, e1907361.
199. Chen, R.; Hui, Y.; Wu, B.; et al. Moisture-tolerant and high-quality α-CsPbI3 films for efficient and stable perovskite solar modules. J. Mater. Chem. A. 2020, 8, 9597-606.
200. Mali, S. S.; Patil, J. V.; Shao, J.; et al. Phase-heterojunction all-inorganic perovskite solar cells surpassing 21.5% efficiency. Nat. Energy. 2023, 8, 989-1001.
201. Yu, X.; Li, J.; Mo, Y.; et al. “Coffee ring” controlment in spray prepared >19% efficiency Cs0.19FA0.81PbI2.5Br0.5 perovskite solar cells. J. Energy. Chem. 2022, 67, 201-8.
202. Zhang, Q.; Liu, H.; Tan, X.; et al. Suppressing “Coffee ring effect” to deposit high-quality CsPbI3 perovskite films by drop casting. Chem. Eng. J. 2023, 454, 140147.
203. Xiao, H.; Zuo, C.; Zhang, L.; et al. Efficient inorganic perovskite solar cells made by drop-coating in ambient air. Nano. Energy. 2023, 106, 108061.
204. Tan, S.; Tan, C.; Cui, Y.; et al. Constructing an interfacial gradient heterostructure enables efficient CsPbI3 perovskite solar cells and printed minimodules. Adv. Mater. 2023, 35, e2301879.
205. Heo, J. H.; Zhang, F.; Xiao, C.; et al. Efficient and stable graded CsPbI3-xBrx perovskite solar cells and submodules by orthogonal processable spray coating. Joule 2021, 5, 481-94.
206. Heo, J. H.; Zhang, F.; Park, J. K.; et al. Surface engineering with oxidized Ti3C2Tx MXene enables efficient and stable p-i-n-structured CsPbI3 perovskite solar cells. Joule 2022, 6, 1672-88.
207. Li, H.; Zhang, W. Perovskite tandem solar cells: from fundamentals to commercial deployment. Chem. Rev. 2020, 120, 9835-950.
208. Wang, J.; Zhao, P.; Hu, Y.; et al. An exploration of all-inorganic perovskite/gallium arsenide tandem solar cells. Solar. RRL. 2021, 5, 2100121.
209. Li, T.; Xu, J.; Lin, R.; et al. Inorganic wide-bandgap perovskite subcells with dipole bridge for all-perovskite tandems. Nat. Energy. 2023, 8, 610-20.
210. Sun, Q.; Zhang, Z.; Zhang, T.; et al. Integrated 4-terminal all-inorganic perovskite tandem solar cell with open-circuit voltage exceeding 2.1 V for water splitting. ACS. Energy. Lett. 2022, 7, 4215-23.
211. Wang, P.; Li, W.; Sandberg, O. J.; et al. Tuning of the interconnecting layer for monolithic perovskite/organic tandem solar cells with record efficiency exceeding 21%. Nano. Lett. 2021, 21, 7845-54.
212. Lang, K.; Xu, J.; Zhang, X.; et al. Ionic liquid-driven intermediate phase engineering for surface-reconstruction of CsPbI2 Br toward high-efficiency perovskite/organic tandem solar cells. Adv. Funct. Mater. 2026, 36, e75071.
213. Han, Y.; Fu, J.; Ren, Z.; et al. Inorganic perovskite/organic tandem solar cells with 25.1% certified efficiency via bottom contact modulation. Nat. Energy. 2025, 10, 513-25.
214. Huang, J.; Han, Y.; Ren, Z.; et al. Perovskite-organic tandem solar cells with superior reverse-bias stability. Nat. Mater. 2026, Epub ahead of print.
215. Wu, H.; Sun, Z.; Li, H.; et al. Review of all-inorganic perovskites and their tandem solar cells with crystalline silicon. Energy. Mater. Devices. 2024, 2, 9370045.
216. Yu, Z.; Leilaeioun, M.; Holman, Z. Selecting tandem partners for silicon solar cells. Nat. Energy. 2016, 1, 16137.
217. Wang, S.; Wang, P.; Chen, B.; et al. Suppressed recombination for monolithic inorganic perovskite/silicon tandem solar cells with an approximate efficiency of 23%. eScience 2022, 2, 339-46.
218. Wang, S.; Wang, P.; Shi, B.; et al. Inorganic perovskite surface reconfiguration for stable inverted solar cells with 20.38% efficiency and its application in tandem devices. Adv. Mater. 2023, 35, 2300581.
219. Wang, Z.; Liu, X.; Lin, Y.; et al. Hot-substrate deposition of all-inorganic perovskite films for low-temperature processed high-efficiency solar cells. J. Mater. Chem. A. 2019, 7, 2773-9.
220. Rao, H.; Ye, S.; Gu, F.; et al. Morphology controlling of all-inorganic perovskite at low temperature for efficient rigid and flexible solar cells. Adv. Energy. Mater. 2018, 8, 1800758.
221. Jiang, H.; Feng, J.; Zhao, H.; et al. Low temperature fabrication for high performance flexible CsPbI2Br perovskite solar cells. Adv. Sci. 2018, 5, 1801117.
222. Liu, D.; Yang, C.; Bates, M.; Lunt, R. R. Room temperature processing of inorganic perovskite films to enable flexible solar cells. iScience 2018, 6, 272-9.
223. Yang, X.; Yang, H.; Hu, X.; et al. Low-temperature interfacial engineering for flexible CsPbI2Br perovskite solar cells with high performance beyond 15%. J. Mater. Chem. A. 2020, 8, 5308-14.
224. Hu, L.; Zhao, Q.; Huang, S.; et al. Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture. Nat. Commun. 2021, 12, 466.
225. Liu, H.; Zhang, Z.; Han, H.; et al. CaF2 nanoparticle-induced γ-CsPbI2.81Br0.19 heterogeneous crystallization for high-efficiency flexible all-inorganic perovskite solar cells. J. Phys. Chem. Lett. 2024, 15, 10514-24.
226. Beal, R. E.; Slotcavage, D. J.; Leijtens, T.; et al. Cesium lead halide perovskites with improved stability for tandem solar cells. J. Phys. Chem. Lett. 2016, 7, 746-51.
227. Draguta, S.; Sharia, O.; Yoon, S. J.; et al. Rationalizing the light-induced phase separation of mixed halide organic-inorganic perovskites. Nat. Commun. 2017, 8, 200.
228. Duong, T.; Mulmudi, H. K.; Wu, Y.; et al. Light and electrically induced phase segregation and its impact on the stability of quadruple cation high bandgap perovskite solar cells. ACS. Appl. Mater. Interfaces. 2017, 9, 26859-66.
229. Xiao, Z.; Zhao, L.; Tran, N. L.; et al. Mixed-halide perovskites with stabilized bandgaps. Nano. Lett. 2017, 17, 6863-9.
230. Balakrishna, R. G.; Kobosko, S. M.; Kamat, P. V. Mixed halide perovskite solar cells. Consequence of iodide treatment on phase segregation recovery. ACS. Energy. Lett. 2018, 3, 2267-72.
231. Chen, W.; Mao, W.; Bach, U.; Jia, B.; Wen, X. Tracking dynamic phase segregation in mixed-halide perovskite single crystals under two-photon scanning laser illumination. Small. Methods. 2019, 3, 1900273.
232. Belisle, R. A.; Bush, K. A.; Bertoluzzi, L.; Gold-parker, A.; Toney, M. F.; Mcgehee, M. D. Impact of surfaces on photoinduced halide segregation in mixed-halide perovskites. ACS. Energy. Lett. 2018, 3, 2694-700.
233. Abdi-jalebi, M.; Andaji-garmaroudi, Z.; Cacovich, S.; et al. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation. Nature 2018, 555, 497-501.
234. Yang, J.; Song, Y.; Yao, J.; et al. Potassium bromide surface passivation on CsPbI3-xBrx nanocrystals for efficient and stable pure red perovskite light-emitting diodes. J. Am. Chem. Soc. 2020, 142, 2956-67.
235. Yang, Z.; Rajagopal, A.; Jo, S. B.; et al. Stabilized wide bandgap perovskite solar cells by tin substitution. Nano. Lett. 2016, 16, 7739-47.
236. Li, N.; Zhu, Z.; Li, J.; Jen, A. K. Y.; Wang, L. Inorganic CsPb1-xSnxIBr2 for efficient wide‐bandgap perovskite solar cells. Adv. Energy. Mater. 2018, 8, 1800525.
237. Wang, Z.; Wang, Y.; Nie, Z.; et al. Laser induced ion migration in all-inorganic mixed halide perovskite micro-platelets. Nanoscale. Adv. 2019, 1, 4459-65.
238. Yang, Z.; Rajagopal, A.; Jen, A. K. Y. Ideal bandgap organic-inorganic hybrid perovskite solar cells. Adv. Mater. 2017, 29, 1704418.
239. Yao, X.; He, B.; Zhu, J.; et al. Tailoring type-II all-in-one buried interface for 1.635V-voltage, all-inorganic CsPbBr3 perovskite solar cells. Nano. Energy. 2022, 96, 107138.
240. Duan, C.; Zou, F.; Wen, Q.; et al. A bifunctional carbazide additive for durable CsSnI3 perovskite solar cells. Adv. Mater. 2023, 35, e2300503.
